Subsea Drilling Systems
4
FMC’s UWD-15 subsea wellhead systems have continuously met customer needs since their introduction in 1991. Today’s UWD-15 family advances this long tradition of excellence in a complete range of high pressure and deepwater applications.
UWD-15 Subsea Wellhead Systems
Modular, Stackable Design
Rated for working pressures up to 15,000 psi, FMC offers UWD-15 subsea wellhead systems for a complete range of shallow and deepwater drilling and production scenarios, including standard, shallow water flow, large bore and rigidized/preloaded operations. These modular designs and multi-task running tools enable
many of the same components to be used across the UWD-15 family.
王浩老婆Specialized Tools Reduce Trips, Installation Time
The benefits of FMC’s modular subsea wellhead design extend to its industry leading running tools. UWD-15 systems use fewer running and test tools than any competitive subsea drilling system. These multi-function tools provide options for running and retrieving components either individually or in combination with other components, enabling fast, accurate and reliable UWD-15 system installation.
18-3/4” Wellhead Running Tool
Standard Rigid Lock Stack Down花千骨毁容
Large Bore
5
Standard UWD-15 System
Designed for drilling and production applications up to 15,000 psi working pressure, the Standard
UWD-15 System features a world-proven weight- s et, metal-to-metal seal design. The Standard
System is designed for applications in water depths ranging from a few hundred feet to 6,000 feet.
Systems are available with annulus monitoring capabilities and can be supplied with a drill-cutting injection system.
我到底要怎么做才能够被你偏爱Rigid Lock Stack Down System
The FMC UWD-15 Rigid Lock Stack Down (RLSD) System is ideal for drilling through formations
where unconsolidated shallow water flow exists and an additional casing string is needed to isolate the zone. The RLSD allows for the addition of a 26” casing string without changing standard drilling procedures or components required for running subsequent casing strings. A Rigid Lock Seal Assem-bly (RLSA) installed between the 36” and 20” casing strings contains any shallow water flow that may be present. The RLSD preloaded system handles the higher bending, fatigue and torsional loads gener-ated by TLP, Spar, DP drill ship and DP semi-sub-mersible applications. The RLSD system, with or without a 26” conductor, is recommended for water depths up to 10,000 feet.
爱我你就抱抱我铃声Large Bore Wellhead System
The FMC Large Bore Wellhead System (LBWS) is an extension of the Rigid Lock Stack Down (RLSD) System product line, with additional provision to run two casing strings (18” and 16”) which are suspended submudline. The LBWS includes addi-tional trip-saving tools, such as single trip tools for the submudline equipment and bore protectors that are run and retrieved with the drill string, which save the operator additional trips.
The FMC Large Bore 2M (LB-2M) Wellhead System is an extension of the UWD-15 Large Bore Well
head System. The LB-2M System features casing hangers and running tools designed to carry additional
casing load at the systems working pressure. The 16” submudline casing hanger, with a two million pounds (2M lbs.) high capacity hanger system has a 10,000 psi working pressure rating. The 2M lbs. high capacity 13-5/8” casing hanger lands inside the high pressure housing and is rated for 15,000 psi working pressure.
The LB-2M high pressure wellhead housing utilizes the same internal profile as the Standard Large Bore system.
This allows FMC to continue to use the same field proven
casing hanger and seal technol-ogy that is used throughout the UWD-15 Subsea Wellhead family. The fully qualified UWD-15 multi-function running tools and bit run/retrieve wear bushings are fully compatible with the LB-2M
system.
Stackable Casing Hangers
Super Flowby Drill
给你们Ahead Tool Metal-to-Metal Seals
发布评论