mop变更填写流程
    English answer：
    Mop Change Process.
    1. Gather materials. You will need a new mop head, a bucket of clean water, and a mop wringer.
    2. Remove the old mop head. Grip the mop head firmly and pull it straight down to remove it from the mop handle.
    3. Attach the new mop head. Align the new mop head with the mop handle and push it up until it clicks into place.
    4. Fill the bucket with clean water. Add a few drops of cleaning solution to the water, if desired.
    5. Submerge the mop head in the water. Swish the mop head around to saturate it with wa
ter.
    6. Wring out the mop head. Hold the mop head over the bucket and squeeze it to remove excess water.
    7. Mop the floor. Start in the farthest corner of the room and work your way towards the exit. Use overlapping strokes to ensure that the entire floor is cleaned.
    8. Rinse the mop head. After each use, rinse the mop head in clean water to remove dirt and debris.
    9. Store the mop. Hang the mop up to dry in a well-ventilated area.
    Additional tips:
change miwa
    Use a different mop head for each type of flooring surface.
    Mop your floors regularly to prevent dirt and grime from building up.
    Clean your mop heads regularly to prevent the spread of bacteria.
    中文回答：
    拖把更换流程。
    1. 准备材料。您需要一个新的拖把头、一桶清水和一个拖把拧干器。
    2. 取下旧拖把头。牢牢抓住拖把头并将其直接向下拉以将其从拖把柄上取下。
    3. 安装新拖把头。将新拖把头与拖把柄对齐，并将其向上推入到位。
    4. 向水桶中装满清水。如果需要，在水中滴入几滴清洁液。
    5. 将拖把头浸入水中。将拖把头在水中晃动以使其吸饱水。
    6. 拧干拖把头。将拖把头放在水桶上并挤压以去除多余的水分。
    7. 拖地。从房间最远的角落开始，向出口处移动。使用重叠的笔触以确保清洁整个地板。
    8. 冲洗拖把头。每次使用后，在清水中冲洗拖把头以去除污垢和碎屑。
    9. 存放拖把。将拖把挂在通风良好的地方晾干。
    其他提示：
    为每种地板表面使用不同的拖把头。
    定期拖地以防止污垢和污垢堆积。
    定期清洁拖把头以防止细菌传播。