A. AIS lost
B. TT lost
C. Navtex message received
D. Cross track alarm
2. What does the alert number 450 indicate?
A. Route：Illegal To WPT
B. RADAR comm. Error
C. LAN adapter version error
D. Heading sensor not available
3. What does the alert number 495 indicate?
A. Anchor watch error
B. Track control stopped
C. Steering parameter error
D. Filter：Init.
4. What does the alert number 380 indicate?
B. User chart：File not found
C. AIS COM error
D. User chart：File read error
5. What does the alert number 635 indicate?
A. No official data
B. Log error
C. Dual axis log (WT) error
D. Dual axis log (BT) error
A. Datum mismatch
B. Chart align：Over 30 min.
英语音乐C. RADAR antenna ID error
爱着谁 指南针D. Gyro error (Trackpilot)那英的雾里看花
7. What does the alert number 031 indicate?
A. Sensor adapter 1 COM timeout
B. Sensor adapter 2 COM timeout
C. Sensor adapter 3 COM timeout
D. Sensor adapter 4 COM timeout
8. What does the alert number 257 indicate?
A. Heading sensor not available
B. Prg track：Need higher speed
C. Prg track：Use radius Ctrl
D. Gyro 3 COM error
9. What does the alert number 470 indicate?
A. WGS 84 not used
B. Different geodetic datum
C. Sentence syntax error
D. Datum change
10. Where do you control the settings and visibility of the chart layers?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
D. In Basic Setting
11. Where do you set the Safety Depth?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
12. Where do you set the Shallow Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
13.Where do you set the Deep Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
14.Where do you set the Safety Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
舒高近况D. In Chart Display
15. Where do you set the Shallow Pattern?
A. In Chart Display
B. In Symbol Display
C. In Basic Setting
D. In Chart Catalogue
16. Where do you control the AIO?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
D. In Chart Catalogue
17.Where do you select the color Palette used to display the charts?
A. In Chart Legend
B. In Chart Display
C. In Quick Access Bar
D. In Chart Catalogue
18.Where do you switch between Multicolor and Two Color settings for the charts?
A. In Chart Legend
B. In Symbol Display
C. In Basic Setting
D. In Chart Display
19. When an ENC is outlined in Green in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. License is not available or has expired.
20. When an ENC is outlined in Orange in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.
21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date
C. License is available - chart not installed
D. License is valid - up-to-date status doubtful.
22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired.
23. When an ENC is outlined in Red in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired
24. When an ENC is outlined in Blue in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.那场风花雪月
25. Where can you find information concerning the charts stored on the HDD?
A. On the Internet.
B. The Chief Officer will know.
C. In the chart catalogue.
D. In the Chart Display menu.
发布评论