1.What does the alert number 820 indicate?
A. AIS lost
B. TT lost
C. Navtex message received
D. Cross track alarm
2. What does the alert number 450 indicate?
A. Route: Illegal To WPT
B. RADAR comm. Error
C. LAN adapter version error
3. What does the alert number 495 indicate?
A. Anchor watch error
B. Track control stopped
C. Steering parameter error
D. Filter: Init.
4. What does the alert number 380 indicate?
A. Route: error
B. User chart: found
C. AIS COM error
D. User chart: error
5. What does the alert number 635 indicate?
A. No official data
B. Log error
C. Dual axis log (WT) error
D. Dual axis log (BT) error
6. What does the alert number 640 indicate?
A. Datum mismatch
B. Chart align: Over 30 min.
C. RADAR antenna ID error
D. Gyro error (Trackpilot)爱丫爱丫歌谱
7. What does the alert number 031 indicate?
A. Sensor adapter 1 COM timeout
B. Sensor adapter 2 COM timeout
C. Sensor adapter 3 COM timeout
D. Sensor adapter 4 COM timeout
8. What does the alert number 257 indicate?
A. Heading sensor not available
B. Prg track: Need higher speed
C. Prg track: Use radius Ctrl
D. Gyro 3 COM error
9. What does the alert number 470 indicate?
A. WGS 84 not used
B. Different geodetic datum
D. Datum change
10. Where do you control the settings and visibility of the chart layers?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
D. In Basic Setting
11. Where do you set the Safety Depth?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
12. Where do you set the Shallow Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
13.Where do you set the Deep Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
14.Where do you set the Safety Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
15. Where do you set the Shallow Pattern?
A. In Chart Display
B. In Symbol Display
C. In Basic Setting
D. In Chart Catalogue
16. Where do you control the AIO?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
向我开炮D. In Chart Catalogue
17.Where do you select the color Palette used to display the charts?
A. In Chart Legend
B. In Chart Display
C. In Quick Access Bar
D. In Chart Catalogue
18.Where do you switch between Multicolor and Two Color settings for the charts?
A. In Chart Legend
C. In Basic Setting
D. In Chart Display
19. When an ENC is outlined in Green in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. License is not available or has expired.
20. When an ENC is outlined in Orange in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.
21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date
C. License is available - chart not installed
D. License is valid - up-to-date status doubtful.
22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired.
23. When an ENC is outlined in Red in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired
24. When an ENC is outlined in Blue in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.
25. Where can you find information concerning the charts stored on the HDD?
A. On the Internet.
B. The Chief Officer will know.
C. In the chart catalogue.
D. In the Chart Display menu.
26. How can you tell if your FURUNO ECDIS is displaying an ENC?
A. There is an "ENC Data available" indication in the Own Ship Functions Box.
B. There is an "RNC data" indication in the Own Ship Functions Box.
C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.
D. There is no special indication in the Own Ship Functions Box.
27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?
B In Chart Catalogue
C In Chart Alert
D In Chart Legend
28. Which information can you find in the Vector Chart Legend?
A Magnetic Variation
B Base CD number
C Permit expiration date
D Safety Contour setting
29. Which information can you find in the Vector Chart Legend?
A T&&P Notices
B Name
C Warnings
D Safety Contour setting
30. Which information can you find in the Vector Chart Legend?
A Notices To Mariners
B Presentation Library edition number
C Chart edition && Update date
D Safety Contour setting
31. Which information can you find in the Raster Chart Legend?
A Magnetic Variation
对你说B Safety Contour setting
C Quality of data
D T&&P Notice
32.Which information can you find in the Raster Chart Legend?
A Horizontal datum
B Safety Depth
C User Permit number
D License number
33.Which information can you find in the Raster Chart Legend?
A Shallow Contour
B Chart Name
C Chart Viewing date
D Deep Contour
34. Which information can you find in the Raster Chart Legend?
A Edition number
B Last displayed update
C Edition date
D Update issue date
35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?
A I select Raster chart in the Main menu.
B I select RN
C in the Chart Legend.
C I select Raster chart from the drop down list in the Status Bar.
D I select RNC in the Chart Catalogue.
36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?
A I select ENC in the Main menu.
B I select Vector chart in the Chart Legend.
C I select Vector chart from the drop down list in the Status Bar.
D I select Vector chart in the Chart Catalogue.
37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?
A I right click on the User Chart function in the route planning tool.
B I click on the Chart Info in the Instant Access Bar.
C I center click on the object.
D I right click on the object.
38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?
A I cannot record own ship's position manually on the FURUNO ECDIS.
B I record LOP in the Record function of the Event Log.
C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.
D I select [Record][Event Log] and [User Event] from the Instant Access bar and insert
the observation in the Record User Event window.
<Cell>b
39 Which operation can you perform on the FURUNO ECDIS?
A I can record target ship's positions in the Voyage log automatically.
B I can record a position fix manually by using just one distance and one bearing.
C I can playback my past voyage track on the charts.
D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on
the GPS.
杨童舒儿子
40 Which operation can you perform on the FURUNO ECDIS?
A I can record my position manually on the ENCs.
B I can set the ECDIS to automatically choosing a Safety Contour based on my setting
of Ship's maximum draft.
C I can set Ship's maximum height to enable chart alerts from areas in the charts
where there is not sufficient air draft.
D I can send a copy of my Route Plan to an AIS target as a Safety Message.
41Which operation can you perform on the FURUNO ECDIS?
A I can play back my ship's past track on the ECDIS.
B I can record my position manually on the RNCs.
C I can create Notes from my Voyage Log to document a voyage on the charts.
D I can set the ECDIS to include engine log information into the Voyage log
automatically.
<Cell>b
<Cell>1
42How do you document your previous voyage on the FURUNO ECDIS?
A I use my paper Logbook as documentation.
B I use my paper Logbook and my VDR or SVDR as documentation.
C I use the tracking function in the symbol display.
发布评论